Ferrous Scrap

 
Click an image to enlarge

  • No.2 Bundles
    • old black and galvanized steel sheet scrap. Hydraulically compressed to charging box size weighing not less than 75 lb. per cubic foot. May not include tin or lead-coated material or enameled material.

  • Bundles No.2 Steel
    • wrought iron or steel scrap, black or galvanized, 1/8 in. and over in thickness, compressed to charging box size and weighing not less than 75 lb. Per cubic foot. Auto body and fender stock, burnt or hand stripped, may constitute a maximum of 60% by weight. (This percent based on make up of auto body, chassis, driver shafts, and bumpers.)Free of all coated material, except as found on automobiles.

      
    Click an image to enlarge

  • Incinerator bundles
    • Tin Cans Scrap, compressed to charging box size and weighing not less that 75lb. Per cubic foot. Processed through a recognized garbage incinerator.



  • No.1 Heavy Melting Steel
    • Wrought iron and/or steel scrap1/4 in. and over in thickness. Individual pieces not over 60 in.* 24 in.(Charging box size) prepared in a manner to insure compact charging.

      
    Click an image to enlarge

  • No.1 Heavy Melting steel 3ft.*18 in
    • Wrought iron and / or steel scrap in. and over in thickness. Individual pieces not over 36 in.*18 in (Charging Box Size) prepared in a manner to insure compact charging.

  • No.2 Heavy Melting steel

    • *Wrought iron and / or steel scrap black and galvanized, 1/8in and over in thickness, charging box size to include material not suitable as No.1 heavy melting steel. Prepared in a manner to insure compact charging.

  • No.2 Heavy Melting steel

    • *Wrought iron and / or steel scrap black and galvanized, Maximum size 36 in *18 in. May include automobile scarp properly prepared.

  • No.2 Heavy Melting steel 3 ft *18 in

    • Wrought iron and / or steel scrap black and galvanized, Maximum size 36 in *18 in. May include automobile scarp properly prepared, however, to be free pf sheets iron or thin-gauged material.

Rerollable Material

 
Click an image to enlarge

Wrought iron and/or steel scrap 1/2 inch and over in thickness. Individual pieces over 36” in length, free from sideways attachments so as to be used in re-rolling mills, may also contain minimum 3 feet long iron bar of minimum 1” thickness.

Shredded Scrap

  • Shredded scrap
    • Homogenous iron and steel scrap, magnetically separated, originating from automobiles, unprepared No.1 and No. 2 steel, miscellaneous bailing and sheet scrap. Average density 50 lb. per cubic foot.

  • Shredded Scrap
    • Homogenous iron and steel scrap, magnetically separated, originating from automobiles, unprepared No.1 and No. 2 steel, miscellaneous bailing and sheet scrap. Average density 70 lb. per cubic foot.

Non Ferrous Scrap

  • Aluminum Products

    •    
    Click an image to enlarge

    Other Aluminum Scrap products
    Tablet
    Tabloid
    Taboo
    Taint / Tabor
    Take
    Talc
    Talcred
    Taldack
    Taldon
    Taldork
    Talk
    Talon
    Tann
    		 Taste
    Tassel
    Tarry A
    Teens
    Telic
    Tense
    Terse
    Tough
    Troma
    Trump
    Twang
    Twist
    Twitch

  • Copper Product

    • Candy

      • No 1 Heavy Copper
      Shall consist of clean, unalloyed, uncoated copper clippings.

    • Cliff

      • No 2 Copper
      Shall consist of miscellaneous, unalloyed copper scrap having a nominal 96%.

    • Clove

      • No. 1 Copper wire Nodules
      Shall consist of No. 1 bare, uncoated, unalloyed copper wire.

    • Cobra

      • No 2 Copperwire Nodules
      Shall consist of No. 2 unalloyed copper wire scrap nodules, chopped or shredded.

    • Mill Berry

      • No. 1 Copperwire
      Shall consist of No. 1 bare, uncoated, unalloyed copper wire, not smaller .

    • Berry

      • No 1 Copperwire Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable.

    • Birch

      • No 2 Copperwire
      Shall consist of miscellaneous, unalloyed copper wire having a nominal 96% copper.

    • Druid

      • Druid— Insulated Coper wire scrap
      Shall consist of copper wire scrap with various types of insulation. To be sold on a sample or recovery basis, subject to agreement .

  • Stainless Steel

    • Series Stainless steel Solids Scrap

      • Shall consist of all types of clean AISI Series Stainless Steel Scrap Solids.

    • Stainless Steel Scrap

      • Shall consist of clean 18-8 type stainless steel clips and solids containing a minimum.

  • Batteries

    • Rakes— BATTERY LUGS
      • To be free of scrap lead, wheel weights, battery plates, rubber and/or plastic case material and other foreign material. A minimum of 97% metallic content is required. Review packaging specifications and regulatory status pertaining to shipping with buyer prior to sale.

Main Page About OIMT Location Products & Services
Powered by WSI